Table of Contents
Advertisement
Ethernet Only Setup with Lamp
1.
Connect the M12-8 male end of the Ethernet cordset (A-BVS-E8S-X) to the M12-8
female connector labeled "LAN" on the camera.
2.
Connect the RJ45 end of the Ethernet cordset to the RJ45 connector labeled
"CAM LAN" on the Panel Link breakout module (A-BVS-PL-100)
Connect the RJ45 labeled "LAN" on the breakout module to the controlling PC,
3.
PLC or the factory LAN
Connect camera PWR and GND to the breakout screw terminals labeled "PWR"
4.
5.
Connect the Lamp via corset A-BVS-L5S-X between the camera (M12-5 and the
lamp)
Setup Computer,
PLC or Factory
Network
Version 02
A-BVS-PL-100
Cat5 Cable
LED Lamp
teledynedalsa.com/ipd
A-BVS-E8S-X
BOA System
A-BVS-L5S-X
11
Hide quick links:
Advertisement
Table of Contents
