Error Log File
In the rare event that a crash occurs in the camera, the current application log is
immediately saved to non-volatile memory. The A68/A38 will then immediately reboot
in order to keep downtime to an absolute minimum. The contents of the error log can
be sent to Technical Support for investigation.
FLIR A68/A38 series cameras reserves enough space in non-volatile memory for 4
error log files. If all 4 error log memory locations are used, no new error logs are
written to non-volatile memory; to enable writing of new error logs, the error logs
must be cleared.
Related GigE Vision Features
The
crashLogCount
feature returns the current number of crashes; for complete
feature descriptions refer to the Camera Information Category section. The error log is
downloaded using the
File Access Control
dialog. Select the "Miscellaneous" file type
and "Error Log" as the file.
Figure 39: File Access Control Dialog
Writing 1 to the
crashLogReset
feature clears crash logs in flash memory; for complete
feature descriptions refer to the Camera Information Category.
90 • Features and Configuration Options
FLIR A68/A38 Series IR Camera User's Manual