Gige Vision Host Control Category; File Access Control Category; Figure 59: Camexpert File Access Control Category - Teledyne FLIR A68 Series User Manual

GigE Vision Host Control Category

The GigE Vision Host controls, as shown by CamExpert, groups parameters used to
configure the host computer system GigE Vision features used for A68/A38 networking
management. None of these parameters are stored in the FLIR A68/A38 series camera.
These features allow optimizing the network configuration for maximum bandwidth.
Settings for these parameters are highly dependent on the number of cameras
connected to a NIC, the data rate of each camera and the trigger modes used.
Information on these features is found in the Teledyne DALSA Network Imaging Module
User manual.

File Access Control Category

The File Access control in CamExpert allows the user to quickly upload various data
files to the connected A68/A38. The supported data files are for firmware updates, etc.

Figure 59: CamExpert File Access Control Category

FLIR A68/A38 Series IR Camera User's Manual Operational Reference • 141