Table 30: File Access Control Feature Descriptions - Teledyne FLIR A68 Series User Manual

File Access Control Feature Descriptions
The following table describes these parameters along with their view attribute.

Table 30: File Access Control Feature Descriptions

Display Name
File Selector
Firmware
Error Log
Current Log
User Defect Pixel Map
User Defect Pixel Map
User Defined Image1
User set 1
User set 2
Software Licenses
False Color Map
File Operation Selector
Open
Close
Read
Write
Delete
File Operation Execute
File Open Mode
Read
Write
File Access Buffer
File Access Offset
File Access Length
142 • Operational Reference
Feature & Values
FileSelector
Firmware1
CrashLog
CurrentLog
FactoryDefectMap
UserDefectPixelMap
UserDefinedImage1
UserSet1
UserSet2
SoftwareLicenses
ColorMap
FileOperationSelector
Open
Close
Read
Write
Delete
FileOperationExecute
FileOpenMode
Read
Write
FileAccessBuffer
FileAccessOffset
FileAccessLength
Description
Selects the file to access. The file types which are
accessible are device-dependent.
Upload new firmware to the camera which will execute
on the next camera reboot cycle. Select the
DeviceReset feature after the upload completes.
Camera error log.
Current camera log.
Factory calibrated defective pixel map.
User generated defective pixel map. The defective pixel
image map is an 8-bit .bmp file containing black (0)
and non-zero pixels (1-255) with non-zero pixels
identifying defective pixels. The image must be the
same size as the acquisition image. For more
information, see the Defective Pixel Correction
User-defined pattern (.bmp file, 640x480, mono8)
File used to download the user settings to the host or
upload another camera's user settings to this camera.
File used to download the user settings to the host or
upload another camera's user settings to this camera.
Software license notices.
Custom false color map (.bmp file, 640x1, RGB888).
Selects the target operation for the selected file in the
device. This operation is executed when the File
Operation Execute feature is called.
Select the Open operation - executed by
FileOperationExecute.
Select the Close operation - executed by
FileOperationExecute.
Select the Read operation - executed by
FileOperationExecute.
Select the Write operation - executed by
FileOperationExecute.
Select the Delete operation - executed by
FileOperationExecute.
Executes the operation selected by File Operation
Selector on the selected file.
Selects the access mode used to open a file on the
device.
Select READ only open mode
Select WRITE only open mode
Defines the intermediate access buffer that allows the
exchange of data between the device file storage and
the application.
Controls the mapping offset between the device file
storage and the file access buffer.
Controls the mapping length between the device file
storage and the file access buffer.
FLIR A68/A38 Series IR Camera User's Manual
View
Guru
section.
Guru
Guru
Guru
Guru
Guru
Guru