Image Format Controls Category; Image Format Controls Feature Descriptions; Figure 47: Camexpert Image Format Controls; Table 18: Image Format Controls Feature Descriptions - Teledyne FLIR A68 Series User Manual

Image Format Controls Category

The Image Format controls, as shown by CamExpert, groups parameters used to
configure camera pixel format, image processing, overlays, and so forth. Additionally, a
feature control to select and output an internal test image simplifies qualifying a
camera setup.
For more information on pixel polarity, test patterns, and color maps, refer to the Pixel
Polarity, Internal Test Pattern Generator, and False Color Mapping sections,
respectively.

Image Format Controls Feature Descriptions

The following table describes these features along with their view attribute.

Table 18: Image Format Controls Feature Descriptions

Display Name
Sensor Width
Sensor Height
Width
Height
Pixel Format
Monochrome 8-Bit
Monochrome 16-bit
YUYV
FLIR A68/A38 Series IR Camera User's Manual

Figure 47: CamExpert Image Format Controls

Feature & Values
SensorWidth
SensorHeight
Width
Height
PixelFormat
Mono8
Mono16
YUV422_8
Description
Displays the sensor width in active image pixels.
Displays the sensor height in active image pixels.
Width of the image provided by the device (in
pixels).
Height of the image provided by the device (in
lines).
Format of the pixel provided by the device.
Contains all format information as provided by
PixelCoding, PixelSize, PixelColorFilter, combined in
one single value.
Monochrome 8-Bit. This format automatically
employs the Contrast Enhancement mechanism to
map the 16-bit sensor output to 8-bits.
Monochrome 16-Bit. This format uses a 16-bit
monochrome buffer format with the most-
significant bits (MSB) packed with 00. This format
is the calibrated raw output of the sensor.
YUYV color 16-bit.
Beginner
Beginner
Beginner
Operational Reference • 103
View
Guru
Guru