Use the Detect Defective Pixels feature (defectivePixelDetectionTrigger) to perform
defective pixel detection.
Note: Automatic defective pixel detection only adds pixels to the list of
defective pixels, therefore it can be run at different ambient operating
temperatures to identify pixels that do not respond well at certain
temperatures only.
If invalid results are generated, the user-defined defective pixel map can always be
reinitialized from the factory defective pixel map. To restore the factory defective pixel
map, use the Defective Pixel Map Restore Factory feature
(defectivePixelRestoreFactoryMap).
Both the factory and user-defined pixel maps can be downloaded from or uploaded to
the camera using the file access functionality.
Related GigE Vision Features
Users can access the user defective pixel map to modify individual pixels in this map
using the features available in the Image Processing Category. Alternatively, an 8-bit
.bmp image representing the defective pixel map can be downloaded from or uploaded
to the camera using the File Access Control Category features.
The File Access Control dialog in CamExpert provides file access to the User Defect
Pixel Map through the Miscellaneous file type category.
FLIR A68/A38 Series IR Camera User's Manual
Figure 25: File Access Control
Features and Configuration Options • 65