3-11.2 Vid Translation Mapping - ZyXEL Communications XGS3600 Series Manual

3-11.2 VID Translation Mapping

This session allows you to map VLAN ID to other VLAN ID for a particular Group ID Globally.
Web Interface
To Display Port to Group mapping table configured in the web interface:
1.Click Configuration, VLAN Translation and VID Translation
2.To click "Add New Entry" and specify Group ID, VLAN ID and Translated to VID.
3.Click Apply.
Figure3-11.2: The VLAN translation table
Parameter description:
These parameters are displayed on the SNMP System Configuration page:

Delete :
To delete a VLAN Translation Group database entry, check this box. The entry will be deleted on the switch
during the next Apply.

Group ID :
A valid Group ID is an integer value from 1 to 28. A set of VLAN Translations are mapped to a group Id. This
way a port is mapped to a list of VLAN Translations easily by mapping it to a group. Number of groups in a
switch is equal to the number of ports present in this switch. A port can be mapped to any of the groups.
Multiple ports can also be mapped to a group with same group Id.
Note: By default, each port is mapped to a group with a group Id equal to the port number. For example, port 1
is mapped to the group with ID=1.

VLAN ID :
Indicates the ID to which Group ID will be mapped. A valid VLAN ID ranges from 1-4094.

Translated to VLAN ID :
Indicates the VID to which VLAN ID of ingress frames will be changed, if VID in incoming frames
if same as configured in VLAN ID field preceded by this field on member ports of a particular
group to which this entry belongs.

Adding a New Port to Group mapping entry :
Click "Add New Entry" to add a new entry in VLAN Translation table. An empty row is added to the table, the
Group ID, VLAN ID and Translated to VID fields can be configured as needed. Legal values for a VLAN ID
are 1 through 4094.
The "Delete" button can be used to undo the addition of new entry.

Buttons :
Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.
Refresh: Click to refresh the page immediately.
Apply: Click to apply changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
XGS3600 Series User's Guide
169