4-13.3 Errdisable Recovery - ZyXEL Communications XGS3600 Series Manual

4-13.3 Errdisable Recovery

Configure Errdisable Recovery on this page.
Web Interface
To configure an Errdisable Detect in the web interface:
1. Click Security, Error Disable, Errdisable Recovery
2. Select the Timer status.
3. Specify Interval
4. Click the Apply to save the setting
Figure 4-13.2: The CPU Protection
Parameter description:
Active :

Select this option to turn on the error-disable recovery function on the Switch.
Reason :

This field displays the supported features that allow the Switch to shut down a port or
discard packets on a port according to the feature requirements and what action you
configure.
Time Status :

Select this option to alllow the Switch to wait for the specified time interval to activate a port
or allow specific packets on a port, after the error was gone. Deselect this option to turn off
this rule.
Interval :

Enter the number of seconds (from 30 to 2592000) for the time interval.
Buttons:

Apply – Click to apply changes.
Cancel- Click Cancel to begin configuring the fields afresh.
XGS3600 Series User's Guide
310