ZyXEL Communications XGS3600 Series Manual page 123

Response Code inserted into the periodic General Queries. The allowed range is 0 to
31744 in tenths of seconds; default query response interval is 100 in tenths of seconds (10
seconds). .
LLQI (LMQI for IGMP) :

Last Listener Query Interval. The Last Listener Query Interval is the Maximum Response
Delay used to calculate the Maximum Response Code inserted into Multicast Address
Specific Queries sent in response to Version 1 Multicast Listener Done messages. It is also
the Maximum Response Delay used to calculate the Maximum Response Code inserted
into Multicast Address and Source Specific Query messages. The allowed range is 0 to
31744 in tenths of seconds, default last listener query interval is 10 in tenths of seconds (1
second).
URI :

Unsolicited Report Interval. The Unsolicited Report Interval is the time between repetitions
of a node's initial report of interest in a multicast address. The allowed range is 0 to 31744
seconds, default unsolicited report interval is 1 second.
Upper right icon (Refresh, <<, >> )

You can click them for refresh the IGMP Group Status by manual, others for
next/up page or entry..
Buttons:

Apply – Click to apply changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
XGS3600 Series User's Guide
116