3-5.5 Group Information - ZyXEL Communications XGS3600 Series Manual

3-5.5 Group Information

After you complete to set the IGMP Snooping function then you could let the switch to display
the IGMP Snooping Group Information. Entries in the IGMP Group Table are shown on this
page. The IGMP Group Table is sorted first by VLAN ID, and then by group. The will use the
last entry of the currently displayed table as a basis for the next lookup. When the end is
reached the text "No more entries" is shown in the displayed table. Use the button to start
over.
Web Interface
To display the IGMP Snooping Group Information in the web interface:
1. Click Configuration, IGMP Snooping, Group Information
2. If you want to auto-refresh the information then you need to evoke the
"Auto-refresh".
3. Click " Refresh" to refresh a entry of the IGMP Snooping Groups
Information.
4. Click "<< or >> " to move to previous or next entry.
Figure 3-5.5: The IGMP Snooping Groups Information.
Parameter description:
Navigating the IGMP Group Table
The "Start from VLAN", and "group" input fields allow the user to select the starting point in
the IGMP Group Table. The will use the last entry of the currently displayed table as a
basis for the next lookup. When the end is reached the text "No more entries" is shown in
the displayed table.
IGMP Group Table Columns
VLAN ID :

VLAN ID of the group.
Groups :

Group address of the group displayed.
Port Members :

Ports under this group.
Auto-refresh

To evoke the auto-refresh icon then the device will refresh the log automatically.
Upper right icon (Refresh, <<, >> )

You can click them for refresh the IGMP Group Status by manual, others for
next/up page or entry..
XGS3600 Series User's Guide
109