ZyXEL Communications XGS3600 Series Manual page 260

1:1 : This will create a 1:1 EPS.
W flow:

The field you need to assign the working flow for the EPS. - See 'Domain'.
P flow:

The field you need to assign the Protecting flow for the EPS. - See 'Domain'.
W SF MEP:

The field you need to assign the working Signal Fail reporting MEP.
P SF MEP:

The field you need to assign the protecting Signal Fail reporting MEP.
APS MEP:

The field you need to assign the APS PDU handling MEP.
Alarm:

There is an active alarm on the EPS. When you complete the setting then switch will show
the alarm status.
Buttons:

Add new EPS - Click to add a new EPS entry.
Apply – Click to apply changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
Upper right icon (Refresh):

You can click them for refresh the refresh information by manual.
XGS3600 Series User's Guide
253