2-6.8 Tarp - ZyXEL Communications XGS3600 Series Manual

2-6.8 Tarp

The function is used to configure SNMP trap. To create a new trap account, please check <No
number> button, and enter the trap information then check <Apply>. Max Group Number : 6.
Web Interface
To configure SNMP Trap setting:
1. Click SNMP, Trap .
2. Display the SNMP Trap Hosts information table.
3. Choice a entry to display and modify the detail parameters or click
delete button to delete the trap hosts entry.
Figure 2-6.8: The SNMP Trap Host Configuration
Parameters description:
Delete:

Check <Delete> entry then check <Apply> button, the entry will be delete.
Trap Version:

Indicates the SNMP trap supported version. Possible versions are:
SNMP v2c: Set SNMP trap supported version 2c.
SNMP v3: Set SNMP trap supported version 3.
Server IP:

XGS3600 Series User's Guide
33