Introduction - ZyXEL Communications XGS3600 Series Manual

Overview
In this user's manual, it will not only tell you how to install and connect your
network system but configure and monitor the XGS3600 Series through the built-in CLI
and web by (RS-232) serial interface and Ethernet ports step-by-step. Many
explanations in detail of hardware and software functions are shown as well as the
examples of the operation for web-based interface and command-line interface (CLI).
The XGS3600 Series, the next generation L2+ Ethernet Fiber switches from
Manufacture, is a 20-port GbE SFP, 4-port Combo GbE (RJ-45/SFP) and 4-port 10GbE
(SFP+) L2+ Ethernet Switch portfolio of affordable fiber switches and a standard switch
that meets all IEEE 802.3/u/x/z/ab/ae standards. The switch deliver more intelligent
features you need to improve the availability of your critical business applications,
protect your sensitive information, and optimize your network bandwidth to deliver
information and applications more effectively. It provides the ideal combination of
affordability and capabilities for fiber networking includes ITU-T G.8032 Ethernet Ring
Protection Switching for Ethernet switch management requirement. It is suitable for
Ethernet switch applications. and helps you create a more efficient, better-connected
workforce. Others it supports AC and DC Dual Power input (100~240VAC/-48VDC) for
Power Redundancy requirement.
XGS3600 SERIES L2+ Ethernet Fiber Switches provide 26 ports in a single device;
the specification is highlighted as follows.
L2+ features provide better manageability, security, QoS, and performance.

ITU-T G.8032 Ethernet Ring Protection Switching.

Support 20 Port (100M/1G SFP) Fiber high-density for scalable connect

requirement.
Support 4-port Combo GbE RJ-45/(100M/1G SFP) for flexible connection

requirement.
Support 4-port 10GbE (1G/10G SFP+) for high speed backbone uplink

requirement
Support 1-port GbE RJ-45 for out-of-band management requirement.

Support IPv4/IPv6 dual stack management

Support SSH/SSL secured management

Support SNMP v1/v2c/v3

Support RMON groups 1,2,3,9

Support sFlow

Support IGMP v1/v2/v3 Snooping

Support MLD v1/v2 Snooping

Support RADIUS and TACACS+ authentication

Support IP Source Guard

Support DHCP Relay (Option 82)

Support DHCP Snooping

Support ACL and QCL for traffic filtering

Support 802.1d(STP), 802.1w(RSTP) and 802.1s(MSTP)

Support LACP and static link aggregation

Support Q-in-Q double tag VLAN

Support GVRP dynamic VLAN

Support AC (100~240VAC) and DC (-48VDC) dual power input for power

redundancy application

INTRODUCTION

XGS3600 Series User's Guide
1