ZyXEL Communications XGS3600 Series Manual page 195

Parameter description:
Port :

The logical port for the settings contained in the same row. Click on the port number in
order to configure the schedulers.
Mode :

Shows the scheduling mode for this port.
Weight (Qn) :

Shows the weight for this queue and port.
Scheduler Mode :

Controls whether the scheduler mode is "Strict Priority" or "Weighted" on this switch port.
Queue Shaper Enable :

Controls whether the queue shaper is enabled for this queue on this switch port.
Queue Shaper Rate :

Controls the rate for the queue shaper. The default value is 500. This value is restricted to
100-1000000 when the "Unit" is "kbps", and it is restricted to 1-10000 when the "Unit" is
"Mbps".
Queue Shaper Unit :

Controls the unit of measure for the queue shaper rate as "kbps" or "Mbps". The default
XGS3600 Series User's Guide
188
If you select the scheduler
mode with weighted then
the screen will change as
the figure.