ZyXEL Communications XGS3600 Series Manual page 160

Tag
VID=5
TPID=Z, Z is not either
88a8 or Ethertype for
Custom S-ports
Tag
VID=5
TPID=either 88a8 or
Ethertype for Custom S-
ports
Ingress Filtering :

Enable ingress filtering on a port by checking the box. This parameter affects VLAN ingress
processing. If ingress filtering is enabled and the ingress port is not a member of the
classified VLAN of the frame, the frame is discarded. By default, ingress filtering is disabled
(no checkmark).
Frame Type :

Determines whether the port accepts all frames or only tagged/untagged frames. This
parameter affects VLAN ingress processing. If the port only accepts tagged frames,
untagged frames received on the port are discarded. By default, the field is set to All.
Egress Rule :

Configures the Port Egress Rule. The allowed values are Hybric, Trunk or Access. This
parameter affects VLAN egress processing.
If Trunk is selected, a VLAN tag with the classified VLAN ID is inserted in frames
transmitted on the port. This mode is normally used for ports connected to VLAN aware
switches.
If Hybrid (the default value) is selected, if the classified VLAN ID of a frame transmitted on
the port is different from the Port VLAN ID, a VLAN tag with the classified VLAN ID is
inserted in the frame.
If Access is selected, untag all frames transmitted on the port.
Port VLAN ID :

Configures the VLAN identifier for the port. The allowed values are 1 through 4095. The
default value is 1.
Buttons:

Apply – Click to apply changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
packet
packet
S-
custom-
port
packet
The port must be a member of the same VLAN as the
N :
OTE
Port VLAN ID.
XGS3600 Series User's Guide
153
Tag
packet
VID=(PVID)
TPID=Ethertype for
Customer S-ports
TPID=Z, Z is not either
88a8 or Ethertype for
Custom S-ports packet will
be discarded
Tag
packet
VID=5
TPID=Ethertype for
Custom S-ports