Port Security; 4-7.1 Limit Control - ZyXEL Communications XGS3600 Series Manual

4-7 Port Security

This section shows you to configure the Port Security settings of the Switch. You can use the
Port Security feature to restrict input to an interface by limiting and identifying MAC addresses.

4-7.1 Limit Control

This section shows you to to configure the Port Security settings of the Switch. You can use
the Port Security feature to restrict input to an interface by limiting and identifying MAC
addresses.
Web Interface
To configure a System Configuration of Limit Control in the web interface:
1. Select "Enabled" in the Mode of
2. Checked Aging Enabled.
3. Set Aging Period (Default is 3600 seconds).
To configure a Port Configuration of Limit Control in the web interface:
1. Select "Enabled" in the Mode of
2. Specify the maximum number of MAC addresses in the Limit of
Configuration.
3. Set Action (Trap, Shutdown, Trap & Shutdown)
4. Click Apply.
Figure 4-7.1: The Port Security Limit Control Configuration
Configuration.
System
Configuration.
Port
XGS3600 Series User's Guide
293
Port