3-14.8 Dscp-Based Qos - ZyXEL Communications XGS3600 Series Manual

3-14.8 DSCP-Based QoS

The section will teach user to configure the DSCP-Based QoS mode that This page
allows you to configure the basic QoS DSCP based QoS Ingress Classification settings
for all switches.
Web Interface
To configure the DSCP –Based QoS Ingress Classification parameters in the web
interface:
1. Click Configuration, QoS, DSCP-Based QoS
2. Evoke to enable or disable the DSCP for Trust
3. Scroll to select QoS Class and DPL parameters
4. Click the Apply to save the setting
5. If you want to cancel the setting then you need to click the Reset
button. It will revert to previously saved values
Figure 3-14.8: The DSCP-Based QoS Ingress Classification Configuration
Parameter description:
DSCP :
•
Maximum number of support ed DSCP values are 64.
Trust :
•
Controls whether a specific DSCP value is trusted. Only frames with trusted DSCP values
are mapped to a specific QoS class and Drop Precedence Level. Frames with untrusted
DSCP values are treated as a non-IP frame.
XGS3600 Series User's Guide
199