3-7.4 Statistics - ZyXEL Communications XGS3600 Series Manual

3-7.4 Statistics

The section describes the switch will display the MVR detail Statistics after you had
configured MVR on the switch. It provides the detail MVR Statistics Information
Web Interface
To display the MVR Statistics Information in the web interface:
1. Click Configuration, MVR, Statistics
2. If you want to auto-refresh the information then you need to evoke the
"Auto-refresh".
3 .To Click the " Refresh" to refresh a entry of the MVR Statistics
Information.
4. Click "<< or >> " to move to previous or next entry.
Figure 3-7.4: The MVR Statistics Information
Parameter description:
VLAN ID :

The Multicast VLAN ID.
V1 Reports Received :

The number of Received V1 Reports.
V2 Reports Received :

The number of Received V2 Reports.
V3 Reports Received :

The number of Received V3 Reports.
V2 Leaves Received :

The number of Received V2 Leaves.
Auto-refresh :

To evoke the auto-refresh icon then the device will refresh the information automatically.
Upper right icon (Refresh, <<, >> ):

You can click them for refresh the MVR Group information by manual, others for next/up
page or entry.
XGS3600 Series User's Guide
127