ZyXEL Communications XGS3600 Series Manual page 303

Limit Reached: Indicates that the limit is reached on this port. This state can only be
shown if Action is set to None or Trap.
Blocked: Indicates that the port is blocked by the Limit Control module. This state can only
be shown if Action is set to Block or Trap & Block.
Re-open Button :

If a port is shut down by this module, you may reopen it by clicking this button, which will
only be enabled if this is the case. For other methods, refer to Shut down in the Action
section.
Upper right icon (Refresh):

You can click them for refresh the Port Security information by manual.
Buttons:

Apply – Click to apply changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
That clicking the reopen button causes the page to be
N :
OTE
refreshed, so non-committed changes will be lost.
XGS3600 Series User's Guide
296