ZyXEL Communications XGS3600 Series Manual page 205

•
DSCP=0: Classify if incoming (or translated if enabled) DSCP is 0.
•
Selected: Classify only selected DSCP for which classification is enabled as specified
in DSCP Translation window for the specific DSCP.
•
All: Classify all DSCP.
Egress :

Port Egress Rewriting can be one of below parameters
•
Disable: No Egress rewrite.
•
Enable: Rewrite enable without remapped.
•
Remap: DSCP from analyzer is remapped and frame is remarked with remapped
DSCP value.
Buttons:
•
Apply – Click to apply changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
XGS3600 Series User's Guide
198