Multitech TalkAnytime TA410 User Manual page 99

Field Description
Bytes
Total bytes sent in call.
Sent
Packets
Packets lost in call.
Lost
Outbound
The DTMF dialing digits
Digits
received by this gateway from
Received
the remote gateway
presuming that DTMF is set to
"Out of Band."
Call
Successful or unsuccessful.
Status
Call
Indicates call's originating
Direction
party.
Field
Server
Details
Disconnect
Reason
Gateway
Number
IP Addr IP address where call
Descript Identifier of site where call
Options When
Multi-Tech Systems, Inc.
"Custom Fields" Definitions (cont'd)
"Custom Fields" Definitions (cont'd)
Description
The IP address of the traffic
control server (if any) being
used (whether an H.323
gatekeeper, a SIP proxy, or
an SPP registrar gateway)
will be displayed here if the
call is handled through that
server.
Indicates whether the call was disconnected simply because the desired conversation was done or
some other irregular cause occasioned disconnection (e.g., a technical error or failure). Values are
"Normal" and "Local" disconnection.
From Details
Originating gateway
originated.
originated.
, log will not
selected
Silence Compression and
Forward Error Correction by
call originator.
TalkAnyTime User Guide
Field Description
Bytes
Total bytes received in call.
Received
Coder
Voice Coder /Compression Rate used for call
will be listed in log.
Prefix
When selected, the phonebook prefix matched
Matched
in processing the call will be listed in log.
Call Type Indicates the Call Signaling protocol used for
the call (H.323, SIP, or SPP apply to MultiVOIP
units; TalkAnytime uses a proprietary
protocol).
DTMF
Indicates whether the DTMF dialing digits are
Capability
carried "Inband" or "Out of Band." The
corresponding field values differ for the 3
different voip protocols.
For H.323, this field can display "Out of Band"
or "Inband". For SIP it can display either "Out
of Band RFC2833" or "Out of Band SIP INFO"
to indicate the out-of-band condition or
"Inband" to indicate the in-band condition. For
SPP it can display "Out of Band RFC2833" or
"Inband".
Field Description
Outbound The dialing digits sent by this gateway to the
Digits Sent
remote gateway presuming that DTMF is set to
"Out of Band."
Completing or answering gateway
Gatew N.
IP address where call was completed or answered.
IP Addr
Identifier of site where call was completed or
Descript
answered.
When selected, log will not use Silence
Options
Compression and Forward Error Correction by
party answering call.
Chapter 5: Technical Configuration
To Details
99