Table of Contents
Advertisement
situation. This may not be the same as your selection for the Country/Region field. The selections in the
Country Selection for Built-In Modem field entail more detailed groupings of telephony parameters
than do the Country/Region values.
In each field, enter the values that fit your particular system.
The Regional Parameters fields are described in the table below.
Field Name
Country/
Region
Multi-Tech Systems, Inc.
"Regional Parameter" Definitions
Values
Description
USA, Japan, UK,
Name of a country or region that uses a certain set of tone pairs for
dial tone, ring tone, busy tone
Custom
survivability tone
denoting survivable mode of VOIP unit), re-order tone (a tone
pattern indicating the need for the user to hang up the phone), and
intercept tone
but has not begun dialing, within a prescribed time, that an
automatic emergency or attendant number will be called; the
automatic call can be used to direct an attendant's attention to a
disabled or distressed caller, allowing an appropriate response to be
made).
In some cases, the tone-pair scheme denoted by a country name
may also be used outside of that country. The "Custom" option
(button) assures that any tone-pairing scheme worldwide can be
accommodated.
Note
:
interface has been chosen in the Interface screen and when the
AutoCall / OffHook Alert field is set to OffHook Alert in the
Voice/Fax Parameters screen. The time allowed for dialing before
the automatic calling process begins is set in the Offhook Alert
Timer field of the Voice/Fax Parameters screen.
TalkAnyTime User Guide
unobtainable tone
,
(tone heard briefly, 2 seconds, after going offhook
(a tone that warns an a party that has gone off hook
is applicable only when the FXS telephony
Intercept tone
Chapter 5: Technical Configuration
(fast busy tone),
89
Advertisement
Table of Contents
