Table of Contents
Advertisement
TalkAnytime Quick Start Instructions
Introduction
The Quick Start Instructions are streamlined instructions intended to get the TalkAnytime unit up and
running quickly. These start-up instructions include assistance on setting up the TalkAnytime unit's
Inbound Phonebook and defining the URL expression, which includes some parameter settings.
A printed Cabling Guide is shipped with the TalkAnytime unit and an electronic copy is included on the
Product CD.
TalkAnytime Startup Tasks
Task
Collecting Phone/IP
Details ( vital! )
Placement
Command/Control
Computer Setup:
Specs & Settings
Hookup
Software Installation
Phone/IP Starter
Configuration
Phonebook/URL Starter
Configuration
Connectivity Test
Troubleshooting
Multi-Tech Systems, Inc.
Summary
The TalkAnytime must be configured to
interface with your particular phone
system and IP network. To do so,
certain details must be known about
those phone and IP systems.
Decide where you'll mount the unit.
Some modest minimum specifications
must be met. A COM port must be set
up.
Connect power, phone, and data cables
per diagram.
This is the configuration program.
It's a standard Windows software
installation.
You will enter phone numbers and IP
addresses. You'll use default parameter
values where possible to get the system
running quickly.
Use "Config Info CheckList" (page 18).
The phonebook is where you specify
how calls will be routed. A special URL
determines how the TalkAnytime will
interact with your web server.
You'll find out if your TalkAnytime
system can receive phone calls from
visitors to your web site. That means
you're up and running!
Detect and remedy any problems that
might have prevented connectivity.
TalkAnyTime User Guide
Startup Tasks
16
Advertisement
Table of Contents
