Multitech TalkAnytime TA410 User Manual page 23

TalkAnytime Quick Start Instructions
Once you've begun using the web browser GUI, you can go back to the TalkAnytime Windows GUI
at any time. However, you must log out of the web browser GUI before using the TalkAnytime
Windows GUI.
5. Go to Configuration | Voice/Fax. Select Coder | "Automatic." At the right-hand side of the dialog box,
click OK. If you know any specific parameter values that will apply to your system, enter them. Click
Copy Channel. Select Copy to All. Click Copy. At main Voice/Fax Parameters screen, click OK to exit
from the dialog box.
6. Enter telephone system information.
Go to Configuration | Interface. Enter parameters obtained from phone company or PBX administrator.
7. Go to Configuration | Regional Parameters. Select the Country/Region that fits your situation. Click
OK and confirm. Click OK to exit from the dialog box.
8. Go to Configuration | Regional Parameters. In the Country Selection for Built-In Modem field (drop-
down list), select the country that best fits your situation. (This may not be the same as your selection for
the Country/Region field. The selections in the Country Selection for Built-In Modem field entail more
detailed groupings of telephony parameters than do the Country/Region values.)
9. Do you want the phone-call logs produced by the TalkAnytime to be sent out by email (to your
Administrator or someone else)?
If NO, skip to step 11.
If YES, continue with step 10.
10. Go to Configuration | SMTP.
SMTP lets you send phone-call log records to the TalkAnytime Administrator by email. Select Enable
SMTP.
You should have already obtained an email address for the TalkAnytime itself (this serves as the
origination email account for email logs that the TalkAnytime can email out automatically).
Enter this email address in the "Login Name" field.
Type the password for this email account.
Multi-Tech Systems, Inc. TalkAnyTime User Guide
Phone/IP Starter Configuration
23