Multitech TalkAnytime TA410 User Manual page 145

Several basic software functions are accessible from the TalkAnytime software menu, as shown below.
Menu Selection
Configuration
Configuration Port Setup
Date and Time Setup
Menu Selection
Download Factory Defaults
Download Firmware
Download IFM Firmware
Download User Defaults
Set Password
Uninstall
Upgrade Software
Multi-Tech Systems, Inc.
TalkAnytime Program Menu
Description
Select this to enter the Configuration program where values for IP,
telephony, and other parameters are set.
Select this to access the COM Port Setup screen of the TalkAnytime
Configuration program.
Select this for access to set calendar/clock used for data logging.
TalkAnytime Program Menu (cont'd)
Description
Select this to return the configuration parameters to the original
factory values.
Select this to download new versions of firmware as enhancements
become available.
Select this to download new versions of IFM firmware as enhancements
become available. The Interface Module (IFM) is the telephony interface for
analog TalkAnytime units (TA410 & TA810). There is one IFM for each
channel of the TalkAnytime unit. For each channel, the IFM handles the
analog signals to and from the attached telephone, PBX or CO line.
To be used after a full set of parameter values, values specified by the
user, have been saved (using Save Setup). This command loads the
saved user defaults into the TalkAnytime.
Select this to create a password for access to the TalkAnytime software
programs (Program group commands, Windows GUI, web browser
GUI, & FTP server). Only the FTP Server function requires a password
for access. The FTP Server function also requires that a username be
established along with the password.
Select this to uninstall the TalkAnytime software (most, but not all
components are removed from computer when this command is
invoked).
Loads firmware (including H.323 stack) and settings from the
controller PC to the TalkAnytime unit. User can choose whether to
load Factory Default Settings or Current Configuration settings.
TalkAnyTime User Guide
Chapter 7: Operation and Maintenance
145