Table of Contents
Advertisement
Field Name
Channel
Call Details
Duration
Mode
Voice Coder
IP Call Type
IP Call Direction
Packet Details
Packets Sent
Packets Rcvd
Bytes Sent
Bytes Rcvd
Packets Lost
From – To Details
Gateway Name
(from)
IP Address (from)
Options
Gateway Name
(to)
IP Address (to)
Options
Multi-Tech Systems, Inc.
Call Progress Details: Field Definitions
Values
Description
1-n
Number of data channel or time slot on which the call is carried.
This is the channel for which call-progress details are being
viewed.
Hours: Minutes:
The length of the call in hours, minutes, and seconds (hh:mm:ss).
Seconds
Indicates whether the call being described was a voice call or a
Voice or FAX
FAX call.
G.723, G.729,
The voice coder being used on this call.
G.711, etc.
H.323, SIP, or SPP
Unlike the MultiVOIP products to which the TalkAnytime is
related, TalkAnytime units use a proprietary call signaling protocol
rather than any of the standard or Multi-Tech specific protocols
(H.323, SIP, or SPP).
incoming,
Indicates whether the call in question is an incoming call or an
outgoing
outgoing call.
integer value
The number of data packets sent over the IP network in the course
of this call.
integer value
The number of data packets received over the IP network in the
course of this call.
integer value
The number of bytes of data sent over the IP network in the course
of this call.
integer value
The number of bytes of data received over the IP network in the
course of this call.
integer value
The number of voice packets from this call that were lost after
being received from the IP network.
alphanumeric
Identifier for the VOIP gateway that handled the origination of this
string
call.
x.x.x.x,
IP address from which the call was received.
where x has a
range of 0 to 255
SC, FEC
Displays VOIP transmission options in use on the current call.
These may include Forward Error Correction or Silence
Compression.
alphanumeric
Identifier for the VOIP gateway that handled the completion of this
string
call.
x.x.x.x,
IP address to which the call was sent.
where x has a
range of 0 to 255
SC, FEC
Displays VOIP transmission options in use on the current call.
These may include Forward Error Correction or Silence
Compression.
TalkAnyTime User Guide
Chapter 7: Operation and Maintenance
134
Advertisement
Table of Contents
