TalkAnytime Quick Start Instructions
Phone/IP Details Often Needed/Wanted
Obtain Email Address for TalkAnytime
required if log reports of
TalkAnytime call traffic
are to be sent by email
SMTP Parameters
Preparation Task:
Ask Mail Server
administrator to set up
email account (with
password) for the
TalkAnytime unit itself.
Be sure to give a unique
identifier to each
individual TalkAnytime
unit.
Get the IP address of the
mail server computer, as
well.
Config Info CheckList
Type of Config Info Gathered TalkAnytime
IP info for TalkAnytime unit
● IP address
● Gateway
● DNS IP (if used)
● 802.1p Prioritization (if used)
Interface Type
(Choices: E&M, FXS/FXO*)
E&M info (only if E&M is used)
● Type (1-5) ● 2 or 4 wires?
● Dial Tone or Wink?
Country Code
Email address for TalkAnytime unit
(optional)
Reminder:
Be sure to Save Setup after entering configuration values.
Multi-Tech Systems, Inc.
(for email call log reporting)
Optional
To: I.T. Department
re: email account for VOIP
voip-unit2@biggytech.com
Configuration screen
on which to enter
Config Info
Ethernet/IP Parameters
Interface Parameters
*In FXO/FXS systems,
channels used for phone, fax,
or key system are FXS;
channels used for analog PBX
extensions or analog telco
lines are FXO.
Interface Parameters
Regional Parameters
SMTP Parameters
TalkAnyTime User Guide
Gathering Phone/IP Details
√
18