Table of Contents
Advertisement
Field Name
Auto Disconnect
Automatic
Disconnect-
ion
Jitter Value
Call
Duration
Consecutive
Packets Lost
Network
Discon-
nection
Multi-Tech Systems, Inc.
Voice/Fax Parameter Definitions (cont'd) )
Values
Description
--
The Automatic Disconnection group provides four options which
can be used singly or in any combination.
1-65535
The Jitter Value defines the average inter-arrival packet deviation
milli-
(in milliseconds) before the call is automatically disconnected. The
seconds
default is 300 milliseconds. A higher value means voice
transmission will be more accepting of jitter. A lower value is less
tolerant of jitter.
Inactive by default. When active, default = 300 ms. However, value
must equal or exceed Dynamic Minimum Jitter Value.
1-65535
Call Duration defines the maximum length of time (in seconds)
seconds
that a call remains connected before the call is automatically
disconnected.
Inactive by default.
When active, default = 180 sec.
This may be too short for most configurations, requiring upward
adjustment.
1-65535
Consecutive Packets Lost defines the number of consecutive
packets that are lost after which the call is automatically
disconnected.
Inactive by default.
When active, default = 30
1 to 65535
Specifies how long to wait before disconnecting the call when IP
seconds;
network connectivity with the remote site has been lost.
Default =
30 sec.
TalkAnyTime User Guide
Chapter 5: Technical Configuration
78
Advertisement
Table of Contents
