Table of Contents
Advertisement
Field Name
Standard Tones fields
Gain 1
Gain 2
Cadence
(msec) On/Off
Custom
(button)
Multi-Tech Systems, Inc.
"Regional Parameter" Definitions (cont'd)
Values
Description
(cont'd)
gain in dB
Amplification factor of lower frequency of pair.
+3dB to –31dB
This applies to the dial, ring, busy and 'unobtainable' tones that the
and "mute"
TalkAnytime unit outputs as audio to the FXS, FXS, or E&M port.
setting
Default: -16dB
gain in dB
Amplification factor of higher frequency of pair.
+3dB to –31dB
This applies to the dial, ring, busy, and 'unobtainable' (fast busy) tones
and "mute"
that the TalkAnytime unit outputs as audio to the FXS, FXO, or E&M
setting
port. Default: -16dB
n/n/n/n
On/off pattern of tone durations used to denote phone ringing, phone
four integer time
busy, connection unobtainable (fast busy), dial tone ("0" indicates
values in
continuous tone), survivability, and re-order. Default values differ for
milli-seconds;
different countries/regions. Although most cadences have only two
zero value for
parts (an "on" duration and an "off" duration), some telephony
dial-tone
cadences have four parts. Most cadences, then, are expressed as two
indicates
iterations of a two-part sequence. Although this is redundant, it is
continuous tone
necessary to allow for expression of 4-part cadences.
Click on the "Custom" button to bring up the Custom Tone Pair
--
Settings screen. (The "Custom" button is active only when "Custom" is
selected in the Country/Region field.) This screen allows the user to
specify tone pair attributes that are not found in any of the standard
national/regional telephony toning schemes.
TalkAnyTime User Guide
Chapter 5: Technical Configuration
91
Advertisement
Table of Contents
