Table of Contents
Advertisement
FXS Loop Start Parameters. The parameters applicable to FXS Loop Start are shown in the figure below
and described in the table that follows.
Field Name
FXS (Loop
Start)
Field Name
FXS Options fields
FXS Ring
Count , FXS
Current Loss
Generate
Current
Reversal
Multi-Tech Systems, Inc.
FXS Loop Start Interface: Parameter Definitions
Values
Description
Y/N
Enables FXS Loop Start interface type.
FXS Loop Start Interface: Parameter Definitions (cont'd)
Values
Description
Maximum number of rings that the TalkAnytime unit will issue
1-99
before giving up the attempted call.
When enabled, the TalkAnytime will interrupt loop current in the
Y/N
FXS circuit to initiate a disconnection. This tells the device
connected to the FXS port to hang up. The TalkAnytime cannot
drop the call; the FXS device must go on hook.
When selected, this option implements Answer Supervision and
Y/N
Disconnect Supervision to the FXO interface using current
reversal to indicate events. Applicable only when FXS and FXO
interfaces are connected back to back.
TalkAnyTime User Guide
Chapter 5: Technical Configuration
82
Advertisement
Table of Contents
