Table of Contents
Advertisement
Local Configuration Procedure (Summary)
After the TalkAnytime configuration software has been installed in the 'Command' PC (which is connected
to the TalkAnytime unit), several steps must be taken to configure the TalkAnytime unit to function in its
specific setting. Although the summary below includes all of these steps, some are optional.
1. Check Power and Cabling.
2. Start TalkAnytime Configuration Program.
3. Confirm Connection.
4. Solve Common Connection Problems.
A. Fixing a COM Port Problem.
B. Fixing a Cabling Problem.
5. Familiarize yourself with configuration parameter screens and how to access them.
6. Set Ethernet/IP Parameters.
7. Set up web browser GUI (optional).
8. Set Voice/Fax Parameters.
9. Set Telephony Interface Parameters.
10. Set Regional Parameters (Phone Signaling Tones & Cadences and setup for built-in Remote
Configuration/Command Modem).
11. Set Custom Tones and Cadences (optional).
12. Set SMTP Parameters (applicable if Log Reports are via Email).
15. Set Log Reporting Method (GUI, locally in TalkAnytime Configuration program; or, SMTP, via email).
16. Set Baud Rate (of COM port connection to 'Command' PC).
17. View System Info screen and set updating interval (optional).
18. Save the TalkAnytime configuration.
19. Create a User Default Configuration (optional).
When technical configuration is complete, you will need to configure the TalkAnytime unit's inbound
phonebook.
Multi-Tech Systems, Inc.
TalkAnyTime User Guide
Chapter 5: Technical Configuration
63
Advertisement
Table of Contents
