User Interface - Siemens KION Service Manual

KION / KION-i
E382 E392E 061 01 02 02
H 6
9
6
Siemens-Elema AB

User interface

Control panel
The control panel section consists of the:
1. Control panel housing.
2. Front panel mounted onto the Control panel
housing. The front panel is available in different
language versions.
3. PC 1672 C P
ONTROL ANEL
control panel housing. The control panel selectors
and potentiometers are connected to PC 1672
C P .
ONTROL ANEL
KION Monitor
The KION Monitor (1) used on the KION workstation
is a Siemens Patient Monitor, SC 7000, SC 9000 or
SC 9000XL. The KION Monitor, that is mounted on
the D S ™, will make the KION workstation
OCKING TATION
an integrated part of the P
The KION Monitor is used not only for clinical
information but also for displaying technical
information during pre-use check, calibration and
troubleshooting of the KION workstation.
For information regarding the KION Monitor, refer to
the User's guides and the Service Manuals for the
Siemens Patient Monitors.
Introduction
mounted inside the
G ™ concept.
ICK AND O
2 - 7
2