Siemens KION Service Manual page 45

KION / KION-i
29. MiniOX 3000 Oxygen Monitor
Not illustrated in the Pneumatic block diagram or in
the Electronic interconnection diagram.
An optional O monitoring device that can be
2
mounted on the KION / KION-i workstation as an
alternative to the multigas analyzer if only O
monitoring is required.
The main parts of the MiniOX 3000 are:
• Oxygen Monitor
• Connection cable
• T-adapter to be connected to the patient cassette
INSP outlet. The adapter holds the O
filter.
• Oxygen sensor (O cell).
2
For further information regarding function, operation
and technical specifications, refer the operating
instructions delivered with the MiniOX 3000.
30. Accessory and Monitor shelfs
Not illustrated in the Pneumatic block diagram or in
the Electronic interconnection diagram.
A KION / KION-i workstation can be equipped with
one of the two optional shelfs Accessory shelf or
Monitor shelf.
The shelfs, that is located above the KION top cover,
are mounted with a bracket onto the column. The
Monitor shelf, intended to carry a heavy monitor, also
includes a support leg.
E382 E392E 061 01 02 02
31. Medside Data Station for KION
Not illustrated in the Pneumatic block diagram or in
the Electronic interconnection diagram.
The optional Medside Data Station for KION is
intended for integration of the Siemens I
M
EDSIDE
2
workstation. It will facilitate a safe use of a clinical
information system as a part of the KION / KION-i
workstation.
The MDS/KION Hardware option contains all
components required to install the MDS to a KION /
KION-i workstation:
cell and a
2
• I
NFINITY
• MDS box
• Monitor arm with bracket
• Keyboard and keyboard tray
• LCD color monitor.
For further information regarding this device,
refer to the "MDS/KION Hardware option – System
Description/Installation Instructions" and to
information regarding the Siemens I
D S
ATA TATION
Siemens-Elema AB
Description of functions
D S (MDS) with the KION / KION-i
ATA TATION
M D S
EDSIDE ATA TATION
.
NFINITY
3
M
NFINITY EDSIDE
3 - 27