Disassembling And Assembling - Siemens KION Service Manual

KION / KION-i
Only personnel trained and authorized by
Siemens shall be permitted to perform
installation, service or maintenance of
the KION / KION-i workstation.
Make sure to prepare the KION / KION-i
workstation properly before disassembling and
assembling. Refer to section "Hazard notices" in
chapter "Important".
Any service or maintenance must be noted in a
log book.
Discard disposable, replaced and left-over parts in
accordance with appropriate industrial and
environmental standards.
After any installation, maintenance or service
intervention in the KION / KION-i, perform a
"Calibration" and a "Function check".
Refer to the "KION / KION-i anesthesia
workstation - Operating Manual" for details.
E382 E392E 061 01 02 02

4. Disassembling and assembling

General ..............................................................
Preparations .......................................................
Handling PC boards ...........................................
Assembling guidelines ......................................
Internal tubing ....................................................
Covers ................................................................
Battery drawer ...................................................
Pneumatic section .............................................
Pressure regulators ........................................
Safety valves ..................................................
Gas distribution block .....................................
Inspiratory control ........................................... 4 - 11
PIVap vaporizers ................................................ 4 - 14
Vaporizer magazine ........................................... 4 - 14
Patient unit ......................................................... 4 - 16
Control panel ..................................................... 4 - 19
Multigas analyzer ............................................... 4 - 23
KION MultiGas 2000 ...................................... 4 - 23
KION MultiGas+ ............................................. 4 - 23
Backup gas supply manifold ............................. 4 - 24
Siemens-Elema AB
Disassembling and assembling
4 - 2
4 - 2
4 - 2
4 - 2
4 - 2
4 - 3
4 - 4
4 - 7
4 - 8
4 - 8
4 - 9
4 - 1
4