Siemens KION Service Manual page 169

KION / KION-i
Twelve months maintenance
Maintenance kit contents
When performing the "Twelve months maintenance",
a "Maintenance kit 12 months for KION" should be
used.
Only original parts from Siemens-Elema must be used
in the KION / KION-i workstation. Spare parts and
maintenance kits can be ordered from your local
Siemens representative.
A
B
x 2
F x 3
L
x 3
G
H
x 2
I x 3
J
x 2
P
Q
x 1
S
T
x 3
x 6
E382 E392E 061 01 02 02
C
x 1
x 3
D
K
x 1
x 1
E
x 3
x 1
M
x 3
x 3
x 1
x 3
N
x 3
x 3 x 6
x 1
O
R
x 1
x 3
U V
x 10 x 3
Siemens-Elema AB
The following parts shall be replaced and they are
included in the "Maintenance kit 12 months for
KION":
A. Fresh gas valve tube and PEEP valve tube.
B. Bacteria filter with tube for the PEEP pressure
transducer.
C. Bacteria filters for the silicone muff in the patient
cassette docking station.
D. Expiratory flow transducer screen (mesh net)
including screw.
E. Filters for the gas modules.
F. Diaphragms for gas modules with metal nozzle
unit (Gas modules Type I).
G. O-rings 6.1 x 1.6 for gas modules with metal
nozzle unit (Gas modules Type I).
H. Washers for gas modules with metal nozzle unit
(BP gas modules Type I).
I. Plastic nozzle units (Gas modules Type II).
J. Cuffs for the Inspiratory gas block.
K. Diaphragm for the fresh gas pressure container.
L. Piston seal for the fresh gas pressure container.
M. Gas inlet filter kit for the Gas distribution block
containing:
• Gas inlet filters
• Gaskets for the gas inlet filters
• O-rings 15.3 x 2.4 for the gas distribution block
• O-ring 19.2 x 3 for the gas distribution block.
N. Valve kit for the Gas distribution block containing:
• Valve plunges with O-rings
• Valve springs
• O-rings 12.1 x 1.6 for the valve housing.
O. Valve assembly plate for the patient cassette.
P. O-ring 9.3 x 2.4 for the vaporizer magazine.
Q. O-ring 36.2 x 3.0 for the vaporizer magazine.
R. One-way valves for the vaporizer magazine inlet
connectors.
S. O-rings 14.1 x 1.6 for the vaporizer magazine inlet
connectors.
T. O-rings 14 x 3 for the vaporizer magazine inlet
and outlet connectors.
U. Screw covers for the vaporizer magazine.
V. O-rings 5.3 x 2.4 for the vaporizer valve.
Backup gas supply manifold maintenance
If the KION / KION-i workstation is equipped with a
Backup gas supply manifold, a spare parts kit
containing 4 gas inlet filters is required during the
"Twelve months maintenance". The seals at the gas
cylinder connection must also be replaced.
Maintenance
7
7 - 3