Profibus/Mpi Interface And Winac Card; Servicing And Maintenance - Siemens simatic PC 577 Operating Instructions Manual

Integration in TIA

9.2 PROFIBUS/MPI interface and WinAC card

9.2 PROFIBUS/MPI interface and WinAC card
9.2
Note
You can use a CP 5613 communication module for the PROFIBUS/MPI interface. A
PROFIBUS/MPI interface is also provided on WinAC cards.
You can find further information in the documentation for the CP 5613 communication
module and in the "Servicing and maintenance" chapter under the section "Installing and
removing hardware components", "PCI/WinAC cards".
9-2
Operating Instructions, Release 04/2006, A5E00798484-01
SIMATIC Panel PC 577