Table of Contents
Advertisement
file:///E:/PV-9661_PV-9662/SVC/s0402020000.html
4.2.2 HOW TO READ THE VALUES OF
THE CYLINDRICAL TYPE CHIP
COMPONENTS.
TOP PREVIOUS NEXT
The widest color band must be read first for value.
1. RESISTOR
There are two types (ERD10LLJ... and ERD10TLJ...) of chip parts.
A. ERD10LLJ : Refer to above type.
B. ERD10TLJ : The narrow color band must be read first for value.
If this part is included in the parts list, be sure that the color band is read properly when
servicing.
2. CAPACITOR
Because of the width of the color bands, the reading direction cannot be specified. However,
the color band can be read on either side. Be sure to confirm the value using the schematic
diagram.
CAUTION :
Once chip parts are removed, they must not be reused.
Always use a new part when installing a chip part.
TOP PREVIOUS NEXT
file:///E:/PV-9661_PV-9662/SVC/s0402020000.html [2006-01-28 11:09:23]
Advertisement
Table of Contents
