Panasonic Omnivision PV-9661 Service Manual page 406

Fig. 8-1
3. Installing the leadless component
a. Presolder the contact points on the circuit board.
Fig. 8-2
b. Press the part downward with tweezers and solder both
electrodes as shown below.
Fig. 8-3
Note:
Do not glue the replacement leadless component to the
circuit board.
4.1.16. MODEL NO. IDENTIFICATION
MARK
Use Marks shown in the chart below to distinguish the different
models included in this Service Manual.
17
PV-9661 / PV-9662