file:///E:/PV-9661_PV-9662/SVC/s0502100100.html
5.2.10.1 Disassembly Procedure
TOP PREVIOUS NEXT
1. Turn the Full Erase Head fully counterclockwise while releasing Locking Tab (F) as shown.
Then remove it.
2. Unhook Spring (A).
3. Remove the Tension Arm Unit by pulling it up while releasing 2 Locking Tabs (G).
4. Remove the S Spring Arm while releasing Locking Tab (H).
5. Pull up on the S Reel Table.
TOP PREVIOUS NEXT
file:///E:/PV-9661_PV-9662/SVC/s0502100100.html [2006-01-28 11:10:12]
Fig. J9-1