file:///E:/PV-9661_PV-9662/SVC/s0502080200.html
5.2.8.2 Reassembly Notes
TOP PREVIOUS NEXT
1.
Alignment of Main Lever Drive Arm
A. Install the Main Lever Drive Arm so that the hole (C) is aligned with the hole on the
chassis Through hole (C)) as shown.
TOP PREVIOUS NEXT
file:///E:/PV-9661_PV-9662/SVC/s0502080200.html [2006-01-28 11:10:07]
Fig. J7-2