Panasonic Omnivision PV-9661 Service Manual page 271

PV-9661 / PV-9662
5.1.7.2. Reassembly Notes
5.1.8. Cassette Up Ass'y
CAUTION:
Opener Lever may be damaged when Cassette Up Ass'y
is removed, with Front Panel Ass'y attached.
Remove the Cassette Up Ass'y as follows:
Fig. D7-1
Fig. D7-2
5.1.8.1. Disassembly Procedure
1. Slide Holder Unit
LOADING/UNLOADING OF MECHANISM" in Service
Notes) to gain access to 2 Screws (J) for removal.
2. Remove Screw (K).
3. Unhook Spring (A).
4. Slide the Cassette Up Ass'y towards the front to release
Locking Tab (J). Then, lift it up and remove.
5.1.8.2. Reassembly Notes
Installation of Cassette Up Ass'y
1. Confirm that the 3 pins and Locking Tab (J) under the
Cassette Up Ass'y are in each of the 4 Guide Holes on the
Mechanism Chassis when installing the Cassette Up Ass'y.
Then, slide the Cassette Up Ass'y towards the back.
2. Slide Holder Unit
LOADING/UNLOADING OF MECHANISM" in Service
Notes) to tighten 2 Screws (J) and Screw (K).
Be careful not to tighten screws too much, or the Cassette
Up Ass'y may be bent outward.
Then, slide it back to the EJECT Position.
3. Hook Spring (A) to the Drive Rack Arm on the Mechanism
Chassis.
22
(refer to "METHOD
Fig. D8
(refer to "METHOD
FOR
FOR