Panasonic Omnivision PV-9661 Service Manual page 123

file:///E:/PV-9661_PV-9662/SVC/s0502130100.html
5.2.13.1 Disassembly Procedure
TOP PREVIOUS NEXT
1. Remove 2 Screws (C).
2. Unsolder P2532 on the Junction C.B.A. Then, remove the Junction C.B.A.
3. Remove Screw (D) and 2 Screws with Washers (D), (E). Then, remove Capstan Stator Unit,
Sub Rotor, and PCB Holder.
CAUTION:
When removing Capstan Stator Unit, avoid touching IC2501 on the Capstan Stator Unit
because it is HOT
file:///E:/PV-9661_PV-9662/SVC/s0502130100.html (1 z 2) [2006-01-28 11:10:24]
during operation.
Fig. J12-1