Panasonic Omnivision PV-9661 Service Manual page 400

4.1.2. SERVICE POSITION
The Basic Service Position does not require the use of
Extension Cables. However, for more extensive servicing,
Extension Cables should be used.
4.1.2.1. Basic Service Position
4.1.2.1.1. Service Position (1)
1. Remove Top Cover and Front Panel Ass'y.
Fig. 2-1
4.1.2.1.2. Service Position (2)
1. Remove Top Cover, Front Panel Ass'y, and Operation I/II
C.B.A.s. Then, remove VCR Chassis Unit out of Frame.
2. Place VCR Chassis Unit and Operation I/II C.B.A.s as
shown.
CAUTION:
HOT CIRCUIT(Primary circuit) exists on the Main C.B.A.
Use extreme care to prevent accidental shock when
servicing.
Note:
When disassembling/assembling, refer
SECTION" in Disassembly/Assembly Procedures.
11
PV-9661 / PV-9662
Fig. 2-2
to "CABINET