Table of Contents
Advertisement
PV-9661 / PV-9662
4 SERVICE NOTES (PLEASE READ)
4.1.
SERVICE NOTES
4.1.1.
SIMPLIFIED FAULT FINDING DATA
Simplified Self-Diagnostic System facilitates finding the cause
of the fault. A 4 digit fault code will be displayed in F.I.P.
The
Simplified
Fault
approximately 12 hours. This data is cleared after it is displayed
and then, the POWER button is pressed back on.
1. With power turned off, press TV/VCR button on VCR (for
over 3 seconds if VCR is not in shut off condition).
2. Fault code (4 digit number) will be displayed in F.I.P. as
shown.
finding
data
is
memorized
Fig. 1-1
Fig. 1-2
Fig. 1-3
for
3. While pressing down TV/VCR button on VCR with power
turned off, press any operation button on either VCR, or
remote to detect that a key has been pressed.
The 1st digit changes to "0" only when key is detected.
Note:
1. When 1 to 4 listed in Lock code occurs, the VCR goes
into VCR shut-off condition. VCR stops and all VCR
function buttons except for power become non-operational.
10
Fig. 1-4
Fig. 1-5
Fig. 1-6
Advertisement
Table of Contents
