Table of Contents
Advertisement
file:///E:/PV-9661_PV-9662/SVC/s0602020505.html
10. Tighten Black Screw (D).
(The Black Screw (D) should be in the approximate center of the hole.)
11. Remove the jumper between TP6003 and +5V(TP6009).
Note:
Old type of H-Position Adjustment Driver (VFK0136) can be used for this adjustment.
TOP PREVIOUS NEXT
file:///E:/PV-9661_PV-9662/SVC/s0602020505.html (2 z 2) [2006-01-28 11:10:57]
Fig. M10
Advertisement
Table of Contents
