FTXM-V Series
Install the side plate (left) (1).
2
5
Install the top plate (3).
3
Finished installation of snow hood (outlet)
1.Install the side plate (left) (1)
on the left side of the front panel
of the outdoor unit using 3 screws (4).
1
1.Install the top plate (3) on the
using 6 screws (4).
3
※When used in combination with
an anti-snow hood (side)
Place the side plate (left)(1)
on the bottom side of the
suction side (right) and
tighten together.
Refer to the figure
on the left.
5
1
Suction side (right)
side plate (left) (1) and side plate (right)(2)
5
226
EDUS042101
C:3P643418-1