Daikin INVERTER FTXM-V Series Engineering Data page 217

FTXM-V Series
For Type B and C Models
2. Remove the fan motor base.
1) Remove the fixing screws at the lower section of the fan motor base. (2 screws)
2) Remove the fan motor base together with the propeller fan and ensure that stress is not placed on the propeller fan
when placing them aside,
• Do not remove the fan motor harness.
• Ensure that the fan motor harness does not come into contact with the edges of the heat exchanger or other
components.


: Truss head tapping screw
B
4
215
B
EDUS042101
IOD-7133