Daikin INVERTER FTXM-V Series Engineering Data page 215

FTXM-V Series
• Request the dealer or an authorized technician to install the product.
Improper installation of the product could result in water leakage, an electric shock, or fire.
• The product must be installed according to the instructions given in this manual.
The Incomplete installation of the product could result in water leakage, an electric shock, or fire.
• Use the supplied or specified installation parts.
Use of other parts could result in the unit becoming loose and falling, water leakage, electric shock, or fire.
• Turn off the power supply at the time of installation.
Touching any electrical parts with the power supply turned on could result in electric shock.
• Use specified wires. Connect and fix the wires so that the wires will not put improper force on the terminal junctions.
Wires connected or fixed improperly could result in terminal overheating, an electric shock, or fire.
• When wiring and connecting the indoor and outdoor units, carefully arrange the wiring so that they will not put improper force on the
structures.
Install covers over the wires. Incomplete cover installation could result in terminal overheating, an electric shock, or fire.
ACCESSORIES
Read these Safety Considerations carefully before installing the drain pan heater. After completing the installation, check
if the unit operates properly during the start-up operation.
Drain Pan Heater
M4 piercing screw
Binding band
Sealing Material
Installation Manual
(multi-language)
Electric Wiring
Diagram Label
Information Label
Alternate Mounting
Plate
TOOLS REQUIRED
• Electric Drill
• ɸ1/8 inch (ɸ3.2mm) drill
• Phillips Screwdriver
• Nippers
WARNING
KEH067A41E KEH063A4E
FTDBHMS FTDBHML
1 1
3 6
1 1
1 2
1 1
1 1
1 1
0 0
2
213
EDUS042101
KEH063A4EA
1
6
1
2
1
1
1
3
IOD-7133