Daikin INVERTER FTXM-V Series Engineering Data page 216

FTXM-V Series
INSTALLATION PROCEDURE
Be sure to check that the power supply of the product is
turned off.
Some stages in the installation procedure differ by model of the outdoor unit. Refer to the instructions for the relevant
model.
TYPE A MODELS: RX09/12NMVJU, RX09/12AXVJU,RXN09/12, RXL09/12
TYPE B MODELS: RX18/24NMVJU,RXN18/24, RXL15
TYPE C MODELS: 2/3/4MXS,2/3MXL
TYPE D MODELS: RX18/24AXVJU
1. Remove each component of the outdoor unit,
1) Remove the top plate.
2) Affix the electric wiring diagram label where there is enough space available on the back of the top plate.
3) Remove the screws from the protective wire mesh if one is fitted. (2 screws)
(For type B and C models only.)
4) Remove the front plate.
5) Remove the anti-drip cover.
(For type B and C models only)
6) Affix the information label near the manufacture's label.
• The appearance of the outdoor unit and the number of screws may differ from some models.
• Screw types for each component are indicated as below.
No Icon: Hexagon tapping screw
: Truss head tapping screw
For Type A and D Models
WARNING
3
214
EDUS042101
IOD-7133