Daikin INVERTER FTXM-V Series Engineering Data page 204

FTXM-V Series
Is it possible to
set times which
straddle days?
The unit does not
turn on even
though the set
" on " time has
come.
(When using the
schedule timer
alone)
The unit does not
turn on even
though the set
" on " time has
come.
(When using the
unit with a central
remote controller)
The unit oper-
ates even though
that day is set as
a holiday.
(When using the
unit with a central
remote controller)
11
Yes, it is possible.
Example:
Start operation at
5:00 a.m. on Sunday
Stop operation at
6:00 p.m. on Monday
The following causes
are possible.
1. Are the " on " time
and the " off " time set
to the same time?
The following causes
are possible. Check
each one.
1. Was the timer num-
ber set with the cen-
tral remote
controller?
Was an incorrect
timer number set?
2. Is another timer no.
set with the central
remote controller set
for " off " at the same
time?
3. Is the operation code
set to " remote control
permission timer "
using the central
remote controller or
the on/off controller?
The following causes
are possible.
1. Is another timer num-
ber set with the cen-
tral remote controller
set for " on " at the
same time?
(If two timer numbers
are set, make sure
that the settings for
holidays and working
days do not overlap
between the different
timer numbers.)
202
The following causes
are possible.
1. The TIME NO. is not
displayed when
The TIME NO. is using the schedule
not displayed. timer alone.
(It can be set if using
the central remote
controller at the
same time.)
The display
remains
" "
The following causes
are possible.
even though I
1. Is the day set to a
push the
holiday?
HOUR/MINUTE
BUTTON in the
timer program
settings.
The following causes
are possible.
1. Is a central remote
controller or on/off
controller also
installed?
∗ ∗ ∗ ∗ The priority order of
the operation codes
depends on the
central devices
which are installed.
The below operation
codes are set.
• Schedule timer
Central remote
I cannot set
controller is used
" central manage-
as well
ment priority " or
Operation code of
" after-push prior-
the central remote
ity " with the
controller
schedule timer.
• Schedule timer
On/off controller is
used as well
Operation code of
the on/off control-
ler
• Schedule timer
Central remote
controller
On/off controller is
used as well
Operation code of
the central remote
controller
EDUS042101
3P124623-5C